Interface ICLDEDMMoveCommand

EDMMOVE CLData command is generated by the Wire EDM operations of the SprutCAM system. The command specifies the wire movement coordinates and sets the movement interpolation modes.

Inherited Members
Namespace: SprutCAMTech.SCPostprocessor
Assembly: SprutCAMTech.SCPostprocessor.dll
Syntax
public interface ICLDEDMMoveCommand : ICLDMotionCommand, ICLDCommand, INamedProperty, ISTGeWatchable

Properties

IsCutsOnly4DMove

Returns "True" if the motion mode is CutsOnly4D, otherwise returns "False".

Declaration
bool IsCutsOnly4DMove { get; }
Property Value
Type Description
bool

IsMultiProf4DMove

Returns "True" if the motion mode is MultiProf4D, otherwise returns "False".

Declaration
bool IsMultiProf4DMove { get; }
Property Value
Type Description
bool

IsPlain2DMove

Returns "True" if the motion mode is Plain2D, otherwise returns "False".

Declaration
bool IsPlain2DMove { get; }
Property Value
Type Description
bool

IsRapidMove

Returns "True" if the motion mode is Rapid, otherwise returns "False".

Declaration
bool IsRapidMove { get; }
Property Value
Type Description
bool

IsTaper2DMove

Returns "True" if the motion mode is Taper2D, otherwise returns "False".

Declaration
bool IsTaper2DMove { get; }
Property Value
Type Description
bool

Lower

Parameters of the lower guide motion (type, coordinates and radius).

Declaration
ICLDEDMMoveSpan Lower { get; }
Property Value
Type Description
ICLDEDMMoveSpan

MotionMode

Mode of the motion: Rapid, Plain2D, Taper2D, MultiProf4D or CutsOnly4D.

Declaration
CLDEDMMotionMode MotionMode { get; }
Property Value
Type Description
CLDEDMMotionMode

RollMode

Sharp corners rounding mode for the 2 axis and taper machining (CornerR function, off, sharp, conical, cylindrical or fixed).

Declaration
EDMRollMode RollMode { get; }
Property Value
Type Description
EDMRollMode

TaperAngle

In the Taper2D movement mode the parameter specifies signed taper angle: "A > 0" – right taper, "A < 0" – left taper.

Declaration
double TaperAngle { get; }
Property Value
Type Description
double

Upper

Parameters of the upper guide motion (type, coordinates and radius).

Declaration
ICLDEDMMoveSpan Upper { get; }
Property Value
Type Description
ICLDEDMMoveSpan